Receive A Call - Kenwood KDC-X301 Manual De Instrucciones

BLUETOOTH®
Once pairing is completed, Bluetooth connection is
established automatically.
• / : "BT1" and/or "BT2" indicator
on the faceplate lights up.
• / : "BT1" and/or "BT2" on the
display window lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will
remain registered in the unit even if you reset the unit.
To delete the paired device,
• A maximum of two Bluetooth phones and one Bluetooth
audio device can be connected at any time.
However, while in BT AUDIO source, you can connect to
five Bluetooth audio devices and switch between these
five devices. ( 20)
• Some Bluetooth devices may not automatically connect
to the unit after pairing. Connect the device to the unit
manually.
• Refer to the instruction manual of the Bluetooth device
for more information.
Auto Pairing
When you connect iPhone/iPod touch/Android device to
the USB input terminal, pairing request (via Bluetooth) is
automatically activated.
Press the volume knob to pair once you have confirmed
the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [AUTO PAIRING] is set to [ON]. ( 19)
– KENWOOD MUSIC PLAY application is installed on the
Android device ( 8) and [BROWSE MODE] is selected ( 9).
16
ENGLISH
BLUETOOTH — Mobile phone
19, [DEVICE DELETE].
When there is an incoming call:
•
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)
During a call:
•
• If you turn off the unit or detach the faceplate, the Bluetooth connection is
The following operations may differ or not available depending on the connected
phone.

Receive a call

: ZONE 2 illuminates in green color and flashes.
/
/ : ZONE 1 illuminates according to the settings made for
[DISPLAY] ( 25) and ZONE 2 illuminates in green color.
disconnected.
To On the faceplate
First incoming call...
Answer a call
Press
or one of the number buttons
(1 to 6).
Reject a call
Press
End a call
Press
On the remote control
or the volume knob Press
Press
.
Press
.
.
.
.