WerkaPro 14658 Manual De Instrucciones Y Uso página 19

Do not attempt to modify the power tool in any way. Use of any accessory or part other than those
recommended in this manual may cause damage to the power tool and injury to the operator.
Have your power tool serviced by a qualified person.
This power tool complies with national and international safety requirements and standards. Only qualified
persons are allowed to carry out repairs, and only using original parts. Failure to comply with this requirement
may expose the user to considerable danger.
Fire precautions
When using certain power tools inside your home or workshop, you must observe a number of fire precautions.
As a precautionary measure, we recommend that you seek expert advice on obtaining a suitable fire
extinguisher and information on its use.
SPECIFIC SAFETY INSTRUCTIONS
Vacuum cleaner/blower
CAUTION!
Never allow children or persons who have not read and understood these instructions to use this
vacuum/blower. Do not use the vacuum/blower for any purpose other than those described in these instructions.
Study the warning labels on the appliance and replace them if they become illegible or are damaged.
Read these instructions carefully. Analyse the function of each control and learn how to use the appliance
correctly and safely.
The user is responsible for any accident affecting a third party or the property of a third party.
Preparation
Always wear sturdy shoes, gloves and appropriate clothing. It is recommended to use approved safety glasses.
Before using your vacuum/blower, always visually inspect it for damaged or worn parts. Replace worn or
damaged parts. Always inspect the insulation of the power cable and the extension cord to be used for cuts
and abrasions, and the condition of the connectors. Any cut or worn cables and damaged connectors should
be replaced before the vacuum/blower is used.
Always check that there is no material left in the vacuum/blower before switching it on. This is potentially
dangerous.
Always check that the residual current device (RCD) is working properly before each use.
Only spare parts recommended for this product should be used.
Be very careful with any repairs and adjustments made to the power tool.
A vacuum/blower that has been modified or is incomplete is dangerous and should not be operated.
Using the vacuum/blower
Always inspect the area to be cleaned for cables or other debris that could damage the vacuum/blower or injure
the operator.
Never vacuum hard objects (e.g. stones, bottles, cans or pieces of metal) with the vacuum/blower. They can
damage the machine and injure the operator and others present.
Never operate the machine with people (especially children) or pets nearby.
Never allow anyone unfamiliar with these instructions to operate the machine.
Avoid using the vacuum/blower in a wet environment as much as possible.
You must know how to stop the vacuum blower quickly in an emergency.
Never operate the vacuum/blower if any of its protective devices are damaged, missing or incorrectly
assembled.
Ensure that you are in a stable and safe operating position before starting to use the vacuum/blower.
Make sure that all nuts and bolts are firmly attached before starting the vacuum/blower.