WerkaPro 14658 Manual De Instrucciones Y Uso página 21

5. Pull out two screws that in the manual bag from package, the user need to assemble fasten the
screw (ST4 x 14) until they connect well. Refer to Fig. 6.
WARNING: IF ANY PART IS MISSING OR DAMAGED, DO NOT PLUG IN THE MACHINE
UNTIL YOU HAVE REPLACED THE MISSING OR DAMAGED PART.
6. Fitting the debris collection bag (Fig.7 and Fig. 8 )
Before fitting the debris collection bag ensure that the Vacuum/Blow selector lever operates smoothly and
that it is not obstructed by debris from the previous use.
Hold the hook on collection bag to tube (refer to Fig. 7), and then locate the bracket of debris collection bag
to insert the curve tube (Refer to Fig. 8).
Starting the vacuum cleaner/blower
Before starting the vacuum cleaner/blower, make sure that the 2 intermediate vacuum cleaner/blower tubes
are correctly attached to each other and to the machine housing.
Fig. 2
Fig. 4
Fig. 6
Fig. 7
Fig. 3
Fig. 5
Fig. 8