Publicidad
Idiomas disponibles
Idiomas disponibles
Installing t hewater f ilter.
(_
efore i nstalling
the water filter, please
remove
the top shell
1. Remove
the water filter cover (1).
2. Remove
the fixed c ap by turning itcounter
clockwise.
Keep the cap inasafe p lace forlater use ifyou
don't use afilter.
3. Remove
the water filter from the box and put
areplacement
indicator
sticker onthe filter as
shown.
Place asticker on the filter with adate s ix
months inthe future.
For e xample,
ifyou install the water filter in
March, put t he "SEP" sticker on the filter to
remind you toreplace itinSeptember.
That way y ou'll know w hen i tistime t oreplace
the filter.
Normal
filter life isabout 6months.
(1)
Sticke
(month
indicator)
4. Remove the filter cap and insert the filter into
the filter housing.
5. Slowly turn the water filter 90 ° clockwise to
align the indicator mark on the filter with lock
indicator on the filter housing.
Make sure to align the water filter label
mark with the center of the lock indicator as
illustrated above, right. Do not over-tighten.
4
Cover filter
the indicator
mark
RemoVe the red cap
on the filter with the
lock indicator
on the
filter housing,
®
A newly installed water filter cartridge may
cause water to briefly spurt from the water
dispenser.
This is caused by air getting into the line.
it should pose no problem to operation.
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
Engl sh --17
Publicidad
