Descargar Imprimir esta página

Starlyf Speed Grinder Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
10 minutes. Then slide the wet skin onto
the sausage horn.
• Put the minced meat in the tray. To fill
in the skin push the meat into the cutter
housing.
• If the skin gets stuck onto the sausage
horn, wet it
MAKING KIBBEH
• Kibbeh is a traditional Middle Eastern
dish. It is usually prepared of lamb and
bulgur minced together to smooth paste.
Paste is formed to hollow tubes, stuffed
with mixture of meat and spices and then
deep-fried. This appliance can also be
used to stuff croquettes or make meat
balls.
• Feed the prepared minced meat
through the kibbeh maker.
• Cut the resulting tube into cylinders of
desired length.
• Stuff the cylinders with filling and seal
the ends.
• Deep-fry kibbeh.
CLEANING AND MAINTENANCE
1. Open the closing ring and switch the
appliance on for some seconds. Any
meat residues will fall out and also the
mincing plate.
CAUTION: the blades are sharp.
2. Switch off the Starlyf® Speed Grinder
and disconnect the power supply cable
from the mains socket. The motor must
stop completely.
3. Detach the meat grinder head from
the main housing by pressing the locking
button. Turn the Starlyf® Speed Grinder
head towards the user while keeping the
button pressed down and remove it from
the main housing. Release the button.
4. Remove the meat grinder plate, and
pull out the worm. Remove any meat
residues.
5. Wash all removable parts in hot water
with a mild detergent. Do not use any ag-
gressive or abrasive detergents. Dry all
parts carefully.
6. The parts are not dishwasher safe.
7. Wipe the main housing with a damp
cloth. Do not clean the main housing un-
der water, nor immerse it into water! Do
not use alcohol, benzene, etc.!
8. The tooth wheel at the end of the fee-
ding worm should be greased after each
cleaning with a greasing agent admitted
for contact with food.
9. Grease the meat grinder plate with oli-
ve oil to prevent air corrosion.
Technical Specification:
220-240 V ~ 50/60 Hz - 300W
Features: ON/OFF/Reverse switch
STARLYF® SPEED GRINDER //
QUALITY WARRANTY
This product is covered by a warranty
against manufacturing defects subject to
the time periods stipulated by the legisla-
tion in force in each country. This warran-
ty does not cover damage resulting from
inadequate use, negligent commercial
use, abnormal wear and tear, accidents
or improper handling.
Australia and New Zealand only.
This product has the benefit of certain
Consumer Guarantees. These are pres-
cribed by the Australian Consumer Law
and the New Zealand Consumer Gua-
rantees Act 1993, both of which provide
protection for consumers. There is no
express warranty for this product in Aus-
tralia or New Zealand. The above para-
graph refers to other countries.
CAUTION DISPOSAL
OF MATERIALS
A symbol of a crossed-out whee-
led bin means you should find out
about and follow local regulations about
disposing of this kind of product. Do not
dispose of this device as you would other
household waste. Dispose of this product
in accordance with the corresponding lo-
cal regulations. Electrical and electronic
appliances contain hazardous substan-
ces that can have harmful effects on the
environment and/or human health and
should be recycled properly.
Made in China
7

Publicidad

loading

Productos relacionados para Starlyf Speed Grinder