Descargar Imprimir esta página

Dometic EA24B Instrucciones De Montaje Y De Uso página 32

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
Warranty
Fault
A layer of ice has
formed in the
device.
12
Warranty
The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when
you send in the product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
32
Possible cause
The door was opened frequently. ➤ Do not open the door more
The set temperature is too low.
The ambient temperature is too
warm.
The device is overfilled.
The door seal is defective.
The door is warped.
The light is switched on perma-
nently.
The thermal fuses or the defrost
thermostat are damaged.
A part of the device or the entire
device is defective.
EA24B, EA24D
Remedy
often than necessary.
➤ Defrost the device if neces-
sary (see chapter "Trouble-
shooting" on page 29).
➤ Increase the temperature (see
chapter "Setting the tempera-
ture" on page 26).
➤ Move the device to a cooler
place (see chapter "Moving
the device" on page 27).
➤ Remove items from the
device .
➤ Contact an authorized service
agent.
➤ Contact an authorized service
agent.
➤ Switch the light off.
➤ Contact an authorized service
agent to replace the light but-
ton.
➤ Contact an authorized service
agent.
➤ Contact an authorized service
agent.
EN

Publicidad

loading

Este manual también es adecuado para:

Ea24d9620001745