Bestron COPPER Serie Manual De Instrucciones página 14

GENERAL
The device is intended for domestic use only and not for professional use. The following description is as-
sociated with the image on page 2:
1. Lid 2. Egg tray 3. Housing 4. On/Off adjustment button 5. Indicator light
FOR FIRST USE
Remove the packaging material and clean the device (see "Cleaning and maintenance").
MEASURING CUP
Determine how hard or soft you want the eggs to be cooked by measuring the correct amount of water with the measuring
cup. Examples:
Egg number
1
2
3
4
5
6
7
BOILING EGGS
1. Fill the heating plate with the desired amount of water using the measuring cup.
2. Use the egg piercer to make a hole in the eggs at the bottom of the measuring cup. This is to prevent
the egg from bursting.
3. Place the eggs on the egg stand and close the lid.
4. Insert the plug into the socket.
5. Then use the on/off adjustment button to set whether you want a soft egg, a semi-soft egg or a hard-
boiled egg. You can experiment with it according to your own preferences. The indicator light lights up.
6. When the eggs are ready, the device emits a signal. The light on the device goes out. Remove the plug
from the socket.
7. Wait 30 seconds before removing the eggs and rinsing them in cold water or under a cold tap.
8. Now the eggs can be served.
Attention:
• After the cooking process the remaining water in the cooking bowl should be removed.
• The egg picker is sharp, be careful not to hurt yourself!
CLEANING AND MAINTENANCE
1. Clean the lid, egg tray and stainless steel heating plate with a damp cloth.
2. Dry the device thoroughly.
Attention:
• Make sure that no moisture gets into the electrical connections.
• Never put the device in a dishwasher.
• Do not use aggressive or abrasive cleaning agents or sharp objects for cleaning.
Depending on the hardness of the water, limescale deposits can occur on the stainless steel heating plate.
Therefore, clean the stainless steel heating plate regularly. Fill the measuring cup with some cleaning
vinegar and add water until the measuring cup is full. Pour this mixture into the stainless steel heating
plate. Let the mixture stand for 30 minutes without turning on the egg cooker. Pour the mixture from the
stainless steel heating plate. Dry the stainless steel heating plate thoroughly.
Water for egg flavor (ml)
Soft egg Semi-soft-boiled egg
70
70
80
80
90
90
90
14 14
Hard boiled egg
80
80
90
90
100
100
100
EN EN
90
90
100
100
110
110
110