EN
Safety Instructions
1
IMPORTANT SAFETY INSTRUCTIONS
• WARNING – When using this product, basic precautions should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or
injury to persons.
• To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power
pack.
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not operate the power pack with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
• To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed servicing.
• When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may
cause explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the
safety of the product is maintained.
• Do not expose the product to sources of ignition or high temperatures, such as high heat vehicles or direct sunlight.
• Keep the product dry and do not immerse it in water or subject it to moisture. Do not use the product in rainy or humid
environments.
• Avoid using the product in a strong static/magnetic field environment.
• When using the product, please follow the operating ambient temperature specified in the user manual. If the
temperature is too high, it may cause a fire or explosion; if the temperature is too low, it may seriously degrade the
performance of the product or stop the product from working.
• When storing the product for a long time, place it in a dry and ventilated place.
01
• Avoid obstructing the fan or placing the product in an unventilated or dusty area.
• Do not disassemble the product or pierce the product with sharp objects.
• Avoid impact, falling or violent vibration. If a serious impact occurs, please turn o the power and stop using the product
immediately.
• Avoid using wires or other metal objects that may cause a short circuit.
• Do not use damaged cords, plugs or output cables to connect this product to avoid electric shock.
• Do not use uno cial components or accessories. If you need to replace any component or accessory, consult the o cial
Segway channel.
• Do not stack heavy objects on the product.
• Do not place the product on an unstable surface to prevent the product from tipping over or falling.
• Ensure that the product is kept out of the reach of children and pets.
• This product is not recommended for powering medical emergency equipment related to personal safety, including
medical grade ventilators and artificial lungs. If you need to power this product, follow your doctor's instructions and
consult the manufacturer. If used for general medical equipment, make sure the power supply is in proper condition.
• When using this product, the power supply generates electromagnetic fields that may interfere with the proper operation
of medical implants or personal medical devices such as pacemakers, cochlear implants, hearing aids, defibrillators, etc. If
these devices are being used, please contact the manufacturer for restrictions on the use of these devices to ensure that
medical implants are kept at a safe distance from this product during use.
• Risk of Electric Shock. Never use power pack to supply power tools to cut or access to live parts or live wirings, or
materials that may contain live parts or live wirings inside, such as building walls, etc.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding
conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes ordinances.
WARNING – Improper connection of the equipment grounding conductor is able to result in a risk of electric shock. Check
with a qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
EN
02