Segway CUBE-1000 Manual De Usuario página 8

EN
4 AC Output
When the power station is on, press the AC ON/OFF Button to turn on AC output, connect the device to the AC socket.
UPS Function
5
When the UPS function is turned on:
① Plug the AC charging cable into the wall outlet and connect the other end to the AC charging port of the power sation.
② Press the AC ON/OFF Button to turn on the AC output, connect the AC device to the AC socket.
* At this point, UPS function is activated, and the power station will automatically switch to inverter-powered when the
power grid fails.
①
②
11
How to Recharge the Power Station
5
The power station has two charging ports, AC charging port and solar/car charging port. When recharging the power
station, the display will show the charging status. There are five charging methods as below, dual-charging is also available.
AC charging
1
2 Car charging
3 Solar charging
4 AC and solar charging
5 AC and car charging
AC charging
EN
Car charging
12