Publicidad
Idiomas disponibles
Idiomas disponibles
Not provided
Power cable
Hot water supply
line
Rubber connector
NOTE
For the hot water supply line – We strongly recommend using
tubing with a compression fitting or a flexible stainless steel braided hot water supply
line.
[Warning: Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a
leak inside the tube fitting.]
You also need a 90° Fitting with
sized to fit your hot water supply line (copper tubing/compression fitting or braided hose)
on the other.
For the power cable, we recommend a jacketed 12-2 cable with ground. Note that some
local codes may require the cable to have a BX style metal jacket.
DW5000C_DW80CB507012AA_DD68-00260A-01_EN.indd 7
DW5000C_DW80CB507012AA_DD68-00260A-01_EN.indd 7
Twist on wire
connector
90° Fitting (
3
/
")
4
Hose clamp
3
/
" N.P.T. external pipe threads on one end and a fitting
4
Strain relief
Electrical tape &
Standard duct tape
Tube fittings
3
/
" minimum O.D. copper
8
Air gap
English 7
2023-12-15
2023-12-15
5:18:05
5:18:05
Publicidad
