6.4 LED HEADLIGHT
Your snow blower comes equipped with LED headlights to increase vision in poor light. Notice
that the headlights are not intended to replace proper lighting. You should always use your
snow blower in daylight or with very bright lighting.
1. The LED headlights are located in the front of the unit. (Fig.8).
2. To turn on the lights, press the LED button on the control panel (Fig.8).
3. To turn off the headlights, press the LED button again.
LED switch
LED headlight
Fig.8
6.5 ADJUST THE AUGER SPEED
The speed of the auger can be adjusted to control the throwing distance.
1. To increase the speed, rotate the speed adjustment knob towards the rabbit symbol
to throw the snow farther. (Fig.9)
2. To decrease the speed, rotate the speed adjustment knob towards the tortoise
symbol to throw the snow nearer. (Fig.9)
Speed adjustment knob
Fig.9
Page 18-English
GREEN MACHINE 62V CORDLESS SNOW BLOWER
6.6 ADJUST DISCHARGE DIRECTION AND HEIGHT
Do not adjust the chute deflector while the safety control bar is engaged, and the unit
is on. Make this adjustment only when the motor is stopped. The chute can be adjust-
ed to change both the direction and the distance of the discharged snow.
To change the direction of the snow discharge:
The direction of snow removal can be adjusted up to 200°by pressing the chute rotation
button. (Fig.10)
1. Press and hold the chute rotation button on the left from the view of the operator's
position, the snow discharge guide turns to the left. (Fig.10)
2. Press and hold the chute rotation button on the right from the view of the operator's
position, the snow discharge guide turns to the right. (Fig.10)
Chute rotation button
200°
To change the distance of the snow discharge:
The throwing distance of the snow blower is adjusted by moving the chute deflector up or
down, the machine offers 5 different positions (-5º~55º).
1. To increase the distance that the snow is thrown, squeeze the trigger on the
chute-deflector handle, and then raise the chute deflector. Release the trigger on
the chute deflector handle to lock the chute deflector in 55 º (Fig.11A/ Fig.11B).
2. To decrease the distance that the snow is thrown, simply lower the deflector with
the chute-deflector handle. Release the trigger on the chute deflector handle to lock
the chute deflector in -5 º (Fig.11B)
Trigger
1
Fig.11A
GREEN MACHINE 62V CORDLESS SNOW BLOWER
Fig.10
2
Fig.11B
Page 19-English