Descargar Imprimir esta página

Green Machine GMSB6200-SS Manual Del Operador página 12

Sopladora de nieve sin cable 62

Publicidad

Idiomas disponibles

Idiomas disponibles

the housing. Insert the 5 bolts into the mounting holes from the inside, shiny surface
of the scraper bar.
4. Place the five washers and nuts on the bolts (from the outside of the housing) and
use a hex wrench to fasten the scraper bar to the housing securely.
Bolt
Fig. 13
7.4 REPLACE THE DRIVE BELT
Always wear gloves when performing any maintenance. Over time, the drive belt may
become worn, excessively cracked, frayed, or otherwise damaged. (PN: GMA-DB)
1. Unscrew five screws with a Phillips screwdriver to remove the drive belt cover.
(Fig.14A)
2. Remove the spring from the hook to release the belt tension (Fig.14B).
3. Pull the tension pulley out a little for easy removal of the belt.
4. Remove the drive belt by slowly turning the auger pulley counterclockwise while
pulling the belt outwards (Fig. 14B).
5. Install a new belt. Rotate the new drive belt first around the motor pulley, then
around the auger pulley. Slowly turn the auger pulley clockwise to drive the belt
inwards (Fig. 14C).
6. Place the tension pulley in place.
7. Re-install the spring onto the hook to tension the drive belt.
8. Re-install the drive belt cover with four screws.
Page 22-English
Nut
Spring washer
GREEN MACHINE 62V CORDLESS SNOW BLOWER
Spring
screw
Fig.14A
Fig.14B
7.5 TRANSPORT AND STORE THE SNOW BLOWER
Do not store or transport the snow blower while it is running. Always remove the battery
packs before storing or transporting them.
Lift the front of the machine while transporting and crossing gravel or road
surfaces.
Always exercise caution to avoid the sharp auger, even when your machine is
turned off.
Before storage, wipe any moisture, dirt, or debris from the battery area.
Wipe the snow blower with a clean dry cloth.
Check all nuts, bolts, knobs, screws, etc., for tightness.
Inspect moving parts for damage, breakage, and wear. Have repairs made on
any damaged or missing parts.
Fold the handle to the storage position.
When not in use store the machine and battery in a dry, well-ventilated area,
out of the reach of children.
Do not store near corrosive materials such as fertilizer or rock salt.
GREEN MACHINE 62V CORDLESS SNOW BLOWER
Motor pulley
Tension pulley
Auger pulley
Fig.14C
Page 23-English

Publicidad

loading