Descargar Imprimir esta página

physa PHY SMC 01 Manual De Instrucciones página 17

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
3.3.1. How to move the chair
Push the backrest of the massage chair to an angle of approx. 45°.
This will enable the chair to be easily moved to another location.
CAUTION:
Do not move the massage chair when it is occupied or in use.
Moving the massage chair may damage the floor. Floor protection is recommended.
3.3.2. How to position the device
Sufficient space must be left at the front and back of the chair.
Where the massage chair is placed, there must be enough space to recline the seat and raise the foot
section.
Make sure there is at least 40 cm of free space behind the massage chair and at least 40 cm of free
space in front of the massage chair.
Make sure there are no obstructions in front and behind the massage chair.
Place a rug under the massage chair to prevent damage to the floor.
3.3.3. Power ON
Make sure there are no obstructions around the massage chair.
Plug the power plug into the power socket and turn on the power switch.
Check the power switch before plugging the massage chair into an outlet.
The power switch should be in the OFF position every time you unplug or plug the chair.
Follow all instructions on how to properly connect the earth wire.
Before switching the chair on, fully insert the plug into the socket.
EN

Publicidad

loading