Publicidad
Idiomas disponibles
Idiomas disponibles
English
Important Notes
Comfort Fit Utility Belts are
suitable only for hand tools
weighing 2.72 kg (6 lbs) or less.
D-Rings featured on the belt are
suitable for tools up to 0.91 kg (2 lbs)
used on a maximum 122 cm (4 ft) tool
tether or tools up to 2.72 kg (6 lbs)
when attached directly for storage.
Belt webbing will anchor a combined
maximum of 22.6 kg (50 lbs) of evenly
distributed weight with a maximum
122 cm (4 ft) tool tethers. Comfort padding
and the attached vertical webbing
should not be used to anchor tools.
This product is intended for use
by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.
Inspect before each use for
damage and proper function:
1. Ensure buckle locks securely
without slipping.
2. Check all hardware for abrasion,
deformity, cuts and sharp edges.
3. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
4. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.
Safety Information
WARNING!
Do not use near
moving parts, mechanisms, running
machinery or rotating equipment.
May contain electrically
conductive materials.
Do not alter product in any way
from its original state.
Use only with tools that are
specifically designed for tethering,
or by using appropriate Guardian
brand attachment products.
Applicable Safety Standards
Meets or exceeds:
ANSI / ISEA 121-2018
2
Publicidad
