KIKKA BOO SPINNY Instrucciones De Uso página 8

IMPORTANT! READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
2. ASSEMBLY
2.1. Insert front base (2) and rear base (3) into the engine machine tube and make sure they are well xed.
2.2. Place the seat supporting set (4) on to the engine machine(1), pay attention to the front and rear direction of the seat, it has anti-dump design, the wrong direction cannot be set
in, when you hear a "click"sound, the assembly is completed.
2.3. Place the seat set (5) on to the seat supporting set (4) as gure show.
2.4. Insert the toy bar (6) directly into the toy bar base plastic. Pay attention to the toy bar well xed or not, if cannot pull out, it is rmly stuck.
2.5. Place the head cushion(7) on to the seat set, join the velcro tape.
3. How to adjust the seat position: There is a plastic puller under the seat support (see gure), pull up this plastic puller to release it, adjust the seat to your desired position, and do
not forget to push down the puller to lock the seat after adjust the seat. A-Push down to lock the seat angle; B-Pull up to release the lock;
CAUTION! Do not adjust position while baby is in the seat.
4. How to remove the seat: Press the button to release it and then pull up the seat.
5. Control panel guide:
A- Power/ Speed. Press to switch on the power. Press again to select swing speed. Press the fourth time to switch o the power.
B- Music/ Volume. Press to play/choose melodies. Long press to adjust volume from high to low.
6. Restrain system (Safety Hardness)
6.1. Place the baby in the baby swing and fasten the seat belt.
6.2. Adjust the seat belt as needed, make sure it is snug and secure.
6.3. To unfasten the belt, press the two side of the buckle.
Caution! Periodically check to ensure that the seat belt is securely attached to the frame as well as securely fastened.
The belts should not be worn or torn, and plastic buckles and fasteners must be sturly, free of damage and secure.
7. How to use battery/ adapter
Battery: 4 units Type C Alkaline Battery (are not included in the package)
Adapter: Please use the adapter that come with this product. Adapter socket (B).
As shown as gure 7 loose the screw to open the battery compartment cover (A).
8. REMOTE CONTROL FUNCTIONS:
1. Power (press this button to close all functions ; 2. Speed button (Press the button when power is on, 3 swing speeds to select) ; 3. Music button (Press to play/pause the music, 8
melodies); 4. Next melody (press to choose melody); 5. Volume button (Press to adjust music volume).
The swing will power o when there is no operation on product 30 minutes.
Remote control battery is type CR2025 3V.
Caution! To be manage only by adult. Remote control is not a toy.
In order to control the baby swing with the remote control, you must point the remote control to the control panel.
Pull out the PVC stopper to active the battery before use.
Cleaning and maintenance
Clean the plastic and metal parts:
1. Before cleaning, unplug the adapter and turn o the power supply.
2. Wipe with a damp cloth with mild soap.
Avoid any liquid contact with adapter, control box, battery box and remote control.
Clean the fabric seat set:
1. Uninstall the seat fabris from the frame.
2. HAND WASH ONLY for the fabric seat set, use a mild detergent mix well with 30 C water.
3. Squeeze out excess water, always hanging to dry.
4. Do not tumble or machine dry.
Instructions for storage
1. When you do not use the swing, please, storage it on dry, windy and safe place. Do not storage the product in dusty, moisture room with very low or very high temperatures.
2. Storage the product away from children.
3. Storage the product on dry and clean place. Do not expose the product on the direct sunlight,
rain, moisture or sharp temperatures.
4. Adapter, used with the infant swing must be regularly examined for damage to the cord, plug, enclosure and other parts and in the events of such damage, it should not be used
until it is replaced.
5. he adaptor, used for swings must be approved by the manufacturer!
Caution! Keep away from re. Do not store the product near heat sources or in direct sunlight for a prolonged time to prevent deformation.
ENGLISH