Bosch GCA 30-42 Professional Manual Original página 11

u Do not attempt to recharge the coin cell
and do not short circuit the coin cell.
The coin cell may leak, explode, catch fire
and cause personal injury.
u Remove and dispose of drained coin cell
correctly. Drained coin cell may leak and
damage the product or cause personal in-
jury.
u Do not overheat the coin cell or throw it
into fire. The coin cell may leak, explode,
catch fire and cause personal injury.
u Do not damage the coin cell and take
the coin cell apart. The coin cell may leak,
explode, catch fire and cause personal in-
jury.
u Do not allow damaged coin cells to come
into contact with water. Leaking lithium
may mix with water to create hydrogen,
which could cause a fire, an explosion, or
personal injury.
Product description and
specifications
Intended Use
The receiver GCA 30-42 receives a start-stop
signal for a Bosch Professional dust extractor.
This signal is transferred by the Auto-Start re-
mote GCT 30-42.
Refer to the operating instructions for the
Auto-Start remote GCT 30-42 or the dust ex-
tractor used for more information.
Product Features
The numbering of the product features shown
refers to the illustrations on the graphic pages.
GCA 30-42 components
(1) Receiver
Bosch Power Tools
(2) Status indicator with Auto-Start symbol
(user interface)
(3) Button (user interface)
(4) Plug
GCT 30-42 components
(5) Auto-Start remote
(6) LED status indicator (user interface)
(7) Start/stop button (user interface)
(8) Fastening hook for rubber band
(9) Rubber band
Technical Data
Receiver
Article number
Operating temperat-
ure
Storage temperature
Dimensions (width x
height)
Data transfer
Bluetooth® Bluetooth® 4.2 (Low
Frequency range
used
Output power
Auto-Start remote
Article number
Operating temperat-
ure
Storage temperature
A)
Dimensions
1 609 92A 7U3 | (30.06.2023)
11
English |
GCA 30-42
1 600 A02 GE.
−20 to +50 °C
−20 to +65 °C
91 x 121 mm
Energy)
2402–2480 MHz
< 10 mW
GCT 30-42
1 600 A02 GH.
−20 to +50 °C
−20 to +65 °C
43 x 18 x 42 mm