Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMED
EDIT RECORDING
6
Programmed
edit function
enables
CD recording
while checking
the remaining
time on each side of the tape as the tracks
are
programmed.
The programmed
edit recording
will not start from a point halfway
in the tape, The tape must be recorded
from the beginning
of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
frclm the unit,
Press the CD button and load the disc(s).
Press
the
EDIT/CHECK
button
twice
while
pressing the SHIFT button on the remote control.
"ED1l-" and "PRGM"
light up on the display.
Plress the numbered
buttons
on the remote
control to designate
the tape length.
1Clto 99 minutes
can be specified.
Maximum
recording
Tape length
time for side A
I
I
Tape side A (front side)
Press the one of the DISC DIRECT PLAY buttons
tc~select a disc.
Tlhen, press the numbered
buttons and the + 10
button on the remote control to program a track.
Example:
To select the 10th track of disc 2, press the DISC
DIRECT
PLAY 2 button,
then press the + 10 and O buttons.
7
8
9
Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining
time
cannot
be programmed.
Remaining
time
of side A
Total number
Programmed
of programmed
tracks
tracks
Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming
B on the display,
repeat step 5,
Tape side B (reverse
side)
Press the EDIT/CHECK button while pressing the
SHIFT button to select side A and press the O
REC/REC MUTE button to start recording.
CD play and recording
of edited tracks for the first side start
simultaneously.
When the last track programmed
for side A
is finished,
deck 2 enters
the recording
stop mode.
After
entering
the recording
stop mode, go to step
9.
Press the EDIT/CHECK
while pressing the SHIFT
button on the remote control for recording
of
the second side.
"B" is displayed.
10 Turn over the tape in deck 2 and press the .
REC/REC MUTE button to start recording.
Recording
starts.
To stop recording
Press the
button, Recording and CD play stop simultaneously.
To check the order of the programmed
track numbers
Before recording,
press the EDIT/CHECK
button while pressing
the SHIFT button on the remote control to select side A or B, and
press the 44
or ›~
button
repeatedly.
Program
number
Track number
Programmed
track numbers
To change the program of each side
Press the EDIT/CHECK
button while pressing
the SHIFT button
on the remote
control
to select
side A or B, and press the
CLEAR
button to clear the program
of the selected
side. Then
program
tracks again.
To clear the edit program
Press the
button twice so
display.
that "EDIT
disappears
on the
ENGLISH
16
Publicidad
