Descargar Imprimir esta página

Aiwa CX-NA31 Manual De Instrucciones página 22

Sistema estereo con reproductor de discos compactos

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECTING
OPTIONAL
EQUIPMENT
\
.
Liq
CD DIGITAL OUT
7(0pT'cAL'
+
I
g'
D
:
*
VIDEO/AUX
rj
@@
w
sn
SUPER
WOOFER
Refer to the operating
instructions
of the connected
equipment
for details.
The connecting
cords are not supplied.
Obtain the necessary
connecting
cords.
Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AUX JACK
-
This unit can input analog
sound signals
through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players,
MD players,
VCRs, TV, etc.).
Connect
the red plug to the R jack, and the white plug to the L
jack,
When connecting
a turntable
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output
CD digital sound signals
through
this jack.
Use an optical
cable to connect
digital audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.).
Remove
the dust cap @ from the CD DIGITAL
OUT (OPTICAL)
jack, Then,
connect
an optical
cable
plug to the CD DIGITAL
OUT (OPTICAL)
jack.
When the
CD DIGITAL OUT (OPTICAL) jack
is not
being
used
Attach the supplied
dust cap.
SUPER WOOFER d JACK
Connect
an optional
powered
sub woofer with a built-in-amplifier
to the jack.
LISTENING TO EXTERNAL
SOURCES
To play equipment
connected
to the VI DEO/AUX
jacks proceed
as follows.
1 Press the VIDEO/AUX
button.
VIDEO
appears
on the display.
2 Play the connected
equipment.
To change a source name in the display
When
the VIDEO/AUX
button
is pressed,
VIDEO
is displayed
initially.
It can be changed
to AUX or TV.
With the power on, press the POWER
button while pressing
the
VIDEO/AUX
button.
Repeat the procedure
to select one of the names.
To
adjust the sound level of the external source
When tie
sound
level of the external
source
is much higher or
much
lower
than
that of other
function
sources,
adjust
it as
follows.
1
Press the VIDEO/AUX
button and play the equipment.
2
I%esss the ++
or -
button so that the sound level becomes
the same as that of other function
sources,
~
m
During
recording,
the sound level can not be adjusted,

Publicidad

loading