ADE KA 2303 Instrucciones De Operación página 23

NOTE on material damage
− Only use utensils made of heat-resistant plastic or wood to remove
the grilled food from the grill plate. Knives or other metal objects will
irreparably damage the non-stick coating of the grill surfaces.
10. While cooking, check the food from time to time. When the food is ready, lift the upper
grill surface by the handle and remove the food from the grill plate.
‚ Grease and juices coming out of the food during grilling end up in the
grease tray. Empty the grease tray as necessary.
‚ Let the upper grill surface rest on the lower grill surface between the
grilling cycles. This way, you preserve the heat and spare yourself
preheating time.
After use
1. When finished grilling, set the temperature control to 0 and unplug the device from the
mains outlet.
2. Let the device cool down completely before cleaning, moving or storing it.
Cleaning
RISK of burns
− Leave the device to cool down before cleaning or storing it.
NOTE on material damage
− Do not use aggressive chemical cleaning agents, abrasives, hard sponges,
etc. for cleaning.
− The device must not be cleaned in a dishwasher or submerged in liquids.
Clean the contact grill after each use.
1. Use a wooden or plastic scraper to loosen and remove baked-on food residues.
2. Wipe the grill surfaces clean with a slightly damp, soft cloth. The grill plates are
permanently attached to the device and cannot be removed.
3. Clean the grease tray by hand in mild, lukewarm dishwashing water.
4. Wipe the outside of the contact grill with a soft cloth lightly moistened with water.
5. You can use any commercially available care agent to take care of the outer surfaces of
the stainless steel housing. Refer to the manufacturer's instructions for use.
Contact grill KA 2303
Cleaning
23