One for All OARN04S Guia Del Usuario página 11

All manuals and user guides at all-guides.com
4.
Note: All TV codes begin with the number 1; all VCR
and DVR codes begin with the number 2; all DVDs, the
number 3; and all satellite receivers, cable boxes and DTV
converters, the number 5.
5.
TIP: To exit the Code Retrieval Mode at any time, press the
Note: If you press an invalid key during the Code Retrieval
process, the remote will not respond. If you do not press a valid
POWER key blinks four times, and then turns off.
Quick Code Reference
Device Type Code
Troubleshooting
Problem: The remote does not operate your device.
Problem: The remote can't be programmed to operate
your device.
enter the codes for your brand and the unit is still not
method.
Problem: The remote doesn't perform commands
properly.
11