Publicidad
Idiomas disponibles
Idiomas disponibles
•
Check the position of the sensors before drilling!
•
The proximity sensors have to be installed correctly. Make
sure that the "UP" mark is always at the top.
5. Testing the sensors
Check whether the parking assistant is working before installing it. Connect the
sensors one after the other and check whether every sensor is working. Start with
sensor "A" and continue with sensor "B", "C" and finally sensor "D". Stand about
2 meters behind the sensor and move slowly towards the sensor. The display
should show a certain distance if you move towards the sensor or away from the
sensor.
English
15
Publicidad
