Publicidad
Idiomas disponibles
Idiomas disponibles
8. Troubleshooting
Error
The display does not show any
image
The display constantly shows an
image although the reverse gear is
not engaged
The camera quality is poor or
blurred
The proximity sensors are not work-
ing properly
9. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
warranty or guarantee. The product may only be used by persons who have read
and understood these instructions. The device specifications may change without
any separate prior notice to this effect.
English
Potential troubleshooting
• Connect the power supply
• Switch on the ignition
• Engage the reverse gear
• Check the camera connection and
connect if necessary
Please connect the power supply to the
reversing light
• Clean the camera lens thoroughly
Ensure that the sensors are properly
connected to the "control box"
19
Publicidad
