cecotec CONGA ROCKSTAR 2500 TITANIUM ERGOWET Manual De Instrucciones página 23

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Vacuuming brush head release button
2. Vacuuming tube release button
3. Dust tank bottom cover unlock button
4. Dust tank opening button and filter access
5. On/Off button
6. Power adapter
7. 2-in-1 narrow accessory for corners and furniture
8. 2-in-1 wide accessory for corners and furniture
9. Jaliscazo brush
10. Vacuuming brush head
11. Flexible vacuuming tube
12. Water tank
13. Charging base
Fig. 2
1. Display
2. Speed-dial
3. On/Off button
4. Battery
5. Battery release button
Please note
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport.
Take the product out of the box and remove all packaging materials. Keep the original box
and other elements in a safe place, as this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
44
- Fully charge the device before the first use.
- Remove the first-use tab installed in the filter.
- During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
- The normal charge time is 6 hours approx. When the battery is fully charged, unplug it.
Box contents
- Conga Rockstar 2500 Titanium ErgoWet Vacuum Cleaner
- 2-in-1 narrow accessory for corners and furniture
- 2-in-1 wide accessory for corners and furniture
- Jaliscazo brush
- Flexible vacuuming tube
- Watertank accessory
- Charging base
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both making sure the
tab on the brush head matches the guides on the tube, and introduce one into the other
until they are firmly fixed.
- To disassemble them, press the vacuuming brush head release button and pull from the
vacuuming tube while you hold the vacuuming brush head.
Warning
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 3
- Introduce the battery in the slot located in the main body following the guides. Once it is
introduced, it will click into place. Once inserted, check that it is secured in position.
- To disassemble the battery, press the release button and remove the battery.
Warning
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
ENGLISH
CONGA ROCKSTAR 2500 TITANIUM ERGOWET 45