emmeti First box Manual De Instalacion Y Uso página 40

1. COMPONENT DESCRIPTION 5. WILO PARA CIRCULATOR
5.4 Manual restart
• When a blockage is detected, the pump tries to restart
automatically. If the pump does not restart
automatically:
• Activate the manual restart by pressing the control key
for 5 seconds, then release.

The restart function starts and lasts 10 minutes max.

The LEDs flash one after the other, clockwise.
WARNING
After restarting, the LED indicator shows the
previously set values of the pump.
If a fault cannot be eliminated, contact a plant
engineer or Wilo Customer Service.
5.5 Declaration of conformity of the circulator
The circulator covered in this instruction manual complies with the fol-
lowing directives and standards:
– Electromagnetic Compatibility Directive 2014/30/EU;
– Low Voltage Directive 2014/35/EU;
– ErP directive 2009/125/EC
The conformity certificate is on the last page of this manual
40
5
sec
10
min
GB GB