Publicidad
EN
ASSEMBLE PET CARRIER
2-1
2-2
ASSEMBLE FRONT WHEELS
3-1
3-2
Button
ASSEMBLE REAR WHEELS
4-1
8. Put 1pc washer, brake, 1pc washer, wheel through the axle as picture 4-1, and then
put 1pc washer, fix the wheel with a clip, and cover the cap.
9. Assemble rear wheels: plug the back tubes into wheel-holders with the brakes
backward.
06
3. Pull up the fabric carrier as
figure 2-1.
4. Press the upholders on the 4
corners as figure 2-2.
2-3
5. Close the zipper as figure 2-3.
6. Put on front wheels: push the
front wheels on the frame till
there is a "click" as picture 3-1.
7. Remove off front wheels:
press down the button as picture
3-1, while pulling up the stroller
by another hand as picture 3-2.
4-2
ASSEMBLE
Brake
PET CARRIER
Brake lever
5
6
10. Open and close the
11. Brake rear wheels: step down
pet carrier by zipper as
the brake levers to park the
picture 5.
stroller; push up the brake levers to
release it.
Folding product
Folding
key
8-1
8-2
8-3
13. Take down the two carriers first, pull up the
folding keys on both sides at same time as
picture 8-2.
14. Press down the frame as picture 8-3.
WARNING
1. For pets only.
2.Do not leave pet in stroller unattended.
3.Always apply the brake whenever the stroller is
stationary.
4.The maximum weight capacity is 15kg.
5.Do not use any component not supplied by
manufacturer.
EN
Safety belt
7
12. Please use the
safety belt while the
pet in the carrier.
Fix the cradle on frame
15. Fix the carrier on frame by hook
and loop fasteners.
Cleaning and
maintenance
Unsnap button on stroller;
1
Take apart the canopy;
2
Take out the cushion;
3
Wipe stroller slightly.
4
07
Publicidad
