Kenwood TTM830 Instrucciones página 3

to use your toaster
1 Plug the toaster into the power
supply.
2 Move the browning control to the
desired setting. Use a low setting for
light toasting and for thin or dry
bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever
'cancel' button will illuminate. (The
lever will not stay down unless the
toaster is plugged in).
To toast frozen bread, move the
G
browning control to the defrost
position .
To stop toasting at any stage, press
G
the 'cancel' button. Never lift the
lever to cancel toasting.
5 Your toast will pop up
automatically, to raise it higher, lift
the lever.
hints on using your
toaster
Select a lower setting for light
G
browning or for dry bread.
Dry/stale bread toasts more quickly
G
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
G
bread slices are of an even
thickness, freshness and size.
In order to achieve uniform browning
G
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
For best results larger slices of bread
G
are best positioned long ways in the
slot.
until it locks. The
care and cleaning
1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster with
a damp cloth, then dry. Do not use
abrasives.
service & customer care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your appliance or
G
servicing or repairs
G
Contact the shop where you bought
your appliance.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
3
. Clean,