Danfoss ERC 211 Guia De Instalacion página 18

Parameter name - ERC 211
Polarity
DI1 input polarity
nc=normally closed, no=normally open
Keyboard lock enable
Readouts
Controller status
S0=cooling ON/Heating ON,
S2=wait for compressor ON time to elapse,
S3=wait for compressor OFF time to elapse-
restart time, S4=drip OFF delay after defrost,
S10=cooling stop,
S11=cooling stopped by thermostat/heating
OFF, S14=defrosting state,
S15=fan delay state after defrost,
S17=door open (DI input),
S20=emergency cooling,
S25=manual control of outputs,
S30=continous cycle/Pull-down,
S32=delay of outputs at power up
Air temperature (Sair)
Read the present regulation reference
DI1 input
Status of night operation
Condenser temperature (Sc)
Compressor relay status
Firmware version readout
Note: hidden parameters are greyed out
| 18
Code Min Max Unit
P--
P73 nc no
P76 no yES
u--
u00 S0 S32
u01 -100.0 200.0 C/F
u02 -100.0 200.0 C/F
u10 oFF on
u13 oFF on
U09 -100.0 200.0 C/F
u58 oFF on
u80 000 999
Installation Guide | ERC 211
App. 0
App. 1 App. 2 App. 3
(Def.)
no no no
no no no
--
---
---
---
---
---
---
---
App. 4 App. 5
no no no
no no -
DKRCE.PI.RL0.F7.ML