Publicidad
Idiomas disponibles
Idiomas disponibles
1
1.1-1.2. Position the wall tracks (A1 & A2) as illustrated. Level the tracks (A1 & A2) and mark its outline and holes positions.
1.3. Remove the tracks and drill pilot holes in the marked locations with a ø5/16 in drill bit.
1.4. If there are no studs located behind the wall tracks (A1 & A2), then insert the wall anchors (AA) using a rubber mallet until
the wall anchors are flush with the wall.
1.5. Replace and secure the tracks (A1 & A2) with screws (BB). Do not overtighten.
NOTE: ALWAYS KEEP THE WALL TRACK (A1) ON LEFT SIDE IN BOTH RIGHT DOOR OPENING AND LEFT
1.1
13/16 in
1.2
A1
1.3
ø5/16 in
1.4
AA
WALL TRACK INSTALLATION
DOOR OPENING INSTALLATIONS!
A1
A1
AA
If there are no studs aligned to the
wall track behind the drywall, use the
wall anchors to ensure the screws
A2
BB
WARNING!
won't become loose.
1.1
A2
13/16 in
1.2
A2
1.5
A1 & A2
BB
PAGE 11
Publicidad
