Palram Aries 1350 Manual De Instrucciones página 2

Assembly
Instructions
Door Cover
Safety Advice
Sort the parts and check against the list of contents.
For
safety purposes we strongly recommend that the product will
be
assembled
by
two
people.
We
strongly recommend the
use
of work
gloves
during
assembly.
Do
not attempt to assemble the Door Cover
in
windy
or
wet conditions.
Always wear shoes and safety goggles.
Dispose of
all
plastic
bags safely
-
keep
them out of
reach
of
small
children.
Keep
children away from the assembly
area.
Do
not attempt to
assemble the Door Cover
if
you
are
tired, have taken drugs,
medication
or alcohol, or if you are prone to dizzy spells.
When using
a
stepladder
or
power tools, ensure that you follow the manufacturers
safety advice.
Ensure
that there
are no
hidden pipes or cables
in
the wall before drilling.
Please
consult your local authorities if any permits
are
required to instal Door Cover
Tighten all screws
when completing
assembly.
Cleaning
instructions
When
your Door
Cover needs cleaning,
use
a
mild detergent solution and
rinse
with
cold clean water.
Do
not
use
acetone, abrasive cleaners or other special detergent to
clean
the
panel.
During Assembly:
When encountering the information icon, please refer to the relevant
assembly step for additional comments and
assistance.
Step
7:
insertion of the elastic bands
(
#7051)
should
be
done simultaneously from
up
and down.
Step 8:
Attention
-
please make sure
that
the installation height of the canopy does
not interrupts door opening.
Draw
a
vertical flush line and
2
horizontal upright
lines.
The
wall plug delivery with the product
are
only define for
a
concrete wall.
In
case
of different wall, please adapt your wall fixation
(seek
for advice from
a
store
representative)
English
Attention!
Please read
these instructions carefully before you start to assemble this product.
Please
carry out the
steps in
the order
set
out
in
these instructions.
Keep
these instructions
in
a
safe
place for future reference.
Warning:
You are
solely responsible
for determining whether the handling,
storage,
assembly,
installation
or use
of this product
is
safe and
appropriate
in any
location or for any given application.
Palram
is
not responsible for
any damages
or injury to you, any other person or any property resulting from the improper
handling, storage, installation, assembly or
use
of
this product, or the failure to
follow
Palram's
written
instructions regarding the handling, storage, installation,
assembly and use
of this product.This product
is
intended for normal residential
use only. Do
not
use
this product for any application that
is
not recommended
in
these instructions or building codes
in
effect
in
location where this product will
be used.
Always take
care
and
use
appropriate safety equipment (including
eye
protection) when assembling
or installing this product.