Blackstone 6028 Manual Del Propietário página 6

Make sure the front pins are fully
OWNER'S MANUAL | ASSEMBLY GUIDE
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Remove the four (4) protective washers from the griddle foot
STEP 04
pins� With the help of another person, place the griddle top onto
the griddle body by aligning the four foot pins to the holes on top of
the unit�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Use the provided hardware to permanently attach the PCB
STEP 05
box to the cabinet�
06
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
With the help of another person, direct the regulator hose
STEP 06
and electric wires through the cabinet hole and place the griddle
body on top of the cabinet�
Use two (2) M5x10 screws [b.] to attach the griddle body to
the cabinet�
[b.] × 2
Model: 6028
BLACKSTONEPRODUCTS.COM/SUPPORT