Descargar Imprimir esta página

Monacor International JTS CS-1CU Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

2 Safety Notes and Instructions
for Use
The products (the controller CS-1CU and the
microphone stations CS-1DU/CS-1CH) corre-
spond to all relevant directives of the EU and
are therefore marked with
The products correspond to the relevant UK leg-
islation and are therefore marked with UKCA.
WARNING The controller uses dangerous
mains voltage. Leave servic-
ing to skilled personnel only.
Inexpert handling or modification
of the device may result in electric shock.
The products are suitable for indoor use only.
Protect them against dripping water and
splash water, high air humidity and heat (ad-
missible ambient temperature range 0 – 40 °C).
Do not place any vessel filled with liquid on
the products, e. g. a drinking glass.
The heat produced inside the controller must
be dissipated by air circulation; never cover
the air vents.
Do not operate the controller and immediately
disconnect the mains plug from the socket
1. if one of the devices or the mains cable is
visibly damaged,
2. if a defect might have occurred after a
device was dropped or suffered a similar
accident,
3. if malfunctions occur.
In any case, the devices must be repaired by
skilled personnel.
Never pull the mains cable to disconnect the
mains plug from the socket; always seize the
plug.
For cleaning only use a dry, soft cloth; never
use water or chemicals.
No guarantee claims for the products and no
liability for any resulting personal damage or
material damage will be accepted if the prod-
ucts are used for other purposes than originally
intended, if they are not correctly connected
or operated, or if they are not repaired in an
expert way.
If the product is to be put out of opera-
tion definitively, dispose of the product
in accordance with local regulations.
16
.
3 Applications
The CS-1 system is used for technical support
of conferences and discussion events with up to
50 microphone stations. Additional audio con-
nections on the controller CS-1CU make it easy
to integrate other devices (such as recorders,
amplifiers, wireless microphone systems, equal-
izers, telecommunications).
Each microphone station (CS-1DU and
CS-1CH) is equipped with a high-quality
microphone capsule, a speaker and two head-
phone jacks with volume control. The micro-
phone stations for chairpersons (CS-1CH) have
a priority button, allowing the chairperson to
interrupt the discussions of other delegates for
their own messages.
Various discussion modes (e. g. a defined
number of delegates talking at the same time
or a talking time with automatic limit), an indi-
cation of date and time, a separate stopwatch
feature, a key lock feature for the controller
and a test feature for all microphone stations
connected make the system extremely versatile.
If more than 50 microphone stations are
required, the CS-1EXM and CS-1EXS devices,
available as accessories, can be used to combine
two or three conference systems to create a
system that may contain up to 150 microphone
stations.
4 Connections
Always switch off the devices before making or
changing any connections!
4.1 Microphone stations
For connecting the microphone stations, the
two jacks "Trunk in /out" (19) are provided on
the controller. Each of these two jacks can be
used to connect a chain of up to 25 microphone
stations of type CS-1CH and /or CS-1DU.
1) Connect the plug (29) of the first microphone
station to one of the jacks "Trunk in /out" (19).
2) Connect the plug (29) of the second micro-
phone station to the jack (28) on the rear of
the first microphone station (or to the other
jack "Trunk in /out" on the controller).
3) Proceed in the same way to connect further
microphone stations. CS-1CH and CS-1DU

Publicidad

loading

Este manual también es adecuado para:

Jts cs-1chJts cs-1du017306001730700173080