Bemer Horse set Manual Del Usuario página 14

Technical data
Product names
Frequencies of the BEMER signal
Battery
Horse blanket
Neck applicator
Cuffs
Charger
Y-adapter
Cuff inlets
Sweat blanket
3 application programs
Product warnings and safety instructions:
Please read these instructions carefully before using
the BEMER Horse set products.
Waste Electrical and Electronic Equipment Directive (WEEE
Directive):
This product must not be disposed of with normal household
waste; it must be taken to a designated collection point for the
recycling of electrical or electronic equipment.
Manufacturer
Refer to the instruction manual
The laundry symbols only apply to the cuff inlets.
Protect against moisture
CE conformity marking
Temperature, humidity and air pressure for storage
Operating conditions
Degree of protection
BEMER Horse set / Cuffs
10 Hz, 30 Hz
Li-ion, 7.2 V, 2350 mAh, 16 Wh. With a fully charged
battery 15–20 treatments are possible using P3.
Surface material: 100% polyester; underside: 100% nylon;
filling: cotton
Flux density 35 µT (max. level); Weight: 3,300 g
Surface material: 100% polyester; inner lining: 100% nylon;
filling: absorbent cotton; flux density: 100 µT (max. level);
Weight: 1,750 g
Surface material 60% polyester, 40% nylon; underside:
100% polyester; flux density 100 µT (max. level):
Weight: 1,600 g
INPUT: 100–240 V~, 50–60 Hz, 0.6 A
OUTPUT: 12 V , 1.5 A, 18 W
PVC
100% polyester
100% polyester
P1 = 5 min., P2 = 10 min., P3 = 15 min.
70°C
-25°C
10 %
40°C
5°C
30 %
IP54
16
75 %
1060 hPa
700 hPa
75 %
1060 hPa
700 hPa