Gewiss Chorus GW 10 786 Manual Del Usuario página 10

GENERAL DESCRIPTION
The movement detector with EIB twilight switch - flush-mounted allows you to send an
activation command to actuator devices using the KNX/EIB bus, according to the
movements and light intensity detected.
The passive Infra Red (IR) sensor has an adjustable lens with fixed opening.
The detector is powered by the bus line and is fitted with two local potentiometers on
the front, to regulate the light sensitivity levels and the variation of the recovery time (+/-
50% of the value set via ETS), and a green indicator LED that signals movement detection
and the consequential messages sent to the bus.
Functions
The device is configured by the ETS software to achieve one of the functions listed
below.
Commands:
- send commands (1 bit/1 byte) of start and/or end of movement events
Other functions:
- movement detection conditioned or unconditioned by light intensity
- regulation of light intensity threshold or via ETS parameter
- function enabling/disabling via bus
- activation of command sending to bus object
- up to 4 auxiliary switching blocks
- safety pause with parameter options
- pure twilight sensor function
Connection diagram
+
bus
-
+ -
10