Publicidad
Idiomas disponibles
Idiomas disponibles
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) On/off switch
(2) Lock-off switch for on/off switch
(3) Auxiliary handle (insulated gripping surface)
(4) Spindle lock button
(5) Scale for mitre/bevel angles
(6) Wing bolt for mitre/bevel angle preselection
(7) Wing bolt for parallel guide
(8) Cut mark 45°
(9) Cut mark 0°
(10) Parallel guide
(11) Retracting blade guard
(12) Base plate
(13) Adjusting lever for retracting blade guard
(14) Chip ejector
Technical data
Hand-held circular saw
Article number
Rated power input
No-load speed
Max. cutting depth
– at a 0° mitre/bevel angle
– at a 45° mitre/bevel angle
Spindle lock
Base plate dimensions
Max. saw blade diameter
Min. saw blade diameter
Max. base blade thickness
Locating bore
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-
specific models.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-5.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power level
107 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-5:
2
Sawing wood: a
< 2.5 m/s
, K = 1.5 m/s
h
Bosch Power Tools
(15) Protective guard
(16) Handle (insulated gripping surface)
(17) Hex key
(18) Clamping bolt with washer
(19) Clamping flange
(20) Circular saw blade
(21) Mounting flange
(22) Saw spindle
(23) Dust extraction adapter
(24) Clamping lever for cutting depth preselection
(25) Cutting depth scale
(26) Wing bolt for mitre/bevel angle preselection
(27) Pair of screw clamps
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)
min
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
2
increase the vibration and noise emissions over the total
working period.
a)
a)
b)
GKS 190
3 601 F23 0.0
W
1400
-1
5500
mm
70
mm
50
●
mm
302 x 140
mm
190
mm
184
mm
2.0
mm
30
kg
4.2
/ II
1 609 92A 83C | (08.07.2022)
English | 15
GKS 190
3 601 F23 0.1
1400
5500
67
49
●
302 x 140
184
184
2.5
16
4.2
/ II
Publicidad
