Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Electrical
Shock Or Personal
Injury
Hazard
Disconnect
electrical
supply before
servicing
or cleaning
the unit.
Failure to do so could result in
electrical shock or personal
injury
from cleaner
suddenly
starting.
Frequently
check and remove
hair, string
and lint build-up
in the brush
area. If
build-up becomes
excessive,
follow the
steps below.
TO REMOVE
BELT
Disconnect
power cord from electrical
outlet.
I
Carpet/Bare
Floor Selector
Place the
carpet/bare
_
o Carpet
floor selector
Position
in the carpet
_
positiono
Slide latches
outward
and
remove nozzle
cover,
Latches
Nozzle
Agitator
Cover
Furniture
Guard
Retainer
Unfasten
the
furniture
guard retain-
ers from the
posts on
both sides of
the agitator
cover.
T.-b," U
Depress
tabs
on rear of agita-
tor cover and
rotate forward
to release
from
the nozzle
body
The light buEb socket assembly
does not
have to be removed.
Lay the agitator
cover over to the side out of the way.
Belt
Position
hands on the agitator.
If the belt
is still attached
to the agitator,
there will
be tension
on the agitator. Carefully
lift
the right end of the agitator
and then the
left end.
NOTE;
It may be necessary
to pull the
edge of the furniture
guard out of the way
to allow the ends of the agitator to be
removed
easily.
Remove the belt from the motor drive
shaft,
A spare belt is provided.
See above illus-
tration for location
of spare belt. You may
keep a spare belt in this location any
time.
E
WARNING
Personal
Injury Hazard
Be careful
when removing
the agi-
tator as the belt tension
is high,
Failure to do so could result in
personal
injury from the agitator
releasing
quickly and snapping
away.
16
Publicidad
