Stertil Koni ST 4032 Instrucciones Para El Uso página 36

5.3 Maintenance
procedures
Table 5.1 Lubrication instructions
Maintenance activities
Cylinder
Check the oil level in the tank
Pawls and control racks
Slack cable safety
Locking bar and guide parts in the
posts
Various fulcrum pins
Cable pulleys
Hydraulic oil in the tank
Operating instructions (Version B)
5.3.1 Lubrication instructions
The vehicle lift must be maintained regularly in accordance with the lubrication
instructions Table 5.1 on page
Description
Oil dry piston rod
Replenish (only with vehicle
lift in the highest position)
Oil fulcrum pin
Oil fulcrum pin
Lubricate
Lubricate
Lubricate with Molycote
PG54
Replace
5.3.2 Hydraulic oil
Replace the hydraulic oil in the tank about once every 2 years.
Note
n
When the vehicle lift is not in constant use, this oil change must also be
carried out.
36
Maintenance procedures
36.
Per Per
month year
x
Every
2 years
x
x
x
x
x
x
x
ST 4032 / ST 4040