Descargar Imprimir esta página

HAMPTON BAY DSHD5979B Guía De Uso Y Mantenimiento página 6

Farol de pared de 1 luz

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation (continued)
4
Making the electrical connections
Ground Wire:
1. Wrap the supply ground wire around the green ground
screw on the crossbar (AA), no less than 2 in. from the end of
the wire. Tighten the ground screw.
2. Connect the fixture ground wire to the supply ground wire
with a wire connector (CC).
Supply Wire:
1. Connect the supply white wire to the white fixture supply
wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black fixture
supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and
carefully insert all of the connected wires into the outlet box.
5
Installing the fixture body to the outlet
box
Reattach the backplate on the fixture body (A) and two
rubber washer (5) to the crossbar assembly (AA).
Secure with the previously removed mounting balls (1).
AA
6
5
1
6
CC
AA
Green ground screw
Installing the light bulb
Install the correct bulb (not included) referring to fixture
markings and/or labels for maximum wattage.
Reattach the cage (2) to the fixture hood on the fixture body (A)
Secure with the previously removed mounting screws (3).
NOTE: Use one 60W maximum medium base (E26) type "A"
or type "S" or 9W maximum medium base (E26)
self-ballasted LED vintage Edison bulb (sold separately).
A
2
3

Publicidad

loading

Este manual también es adecuado para:

1007 260 228