MN010089A01-AD
Chapter 2: Pre-Installation
Procedure:
1. Select one of the following options for charging the Camera Batteries:
Option
Actions
To use
perform the following actions:
the USB-
a. Open the Charging Port door by unscrewing the security screw with the Pin and
C cable
and a
b. Plug the end of the USB-C Charging Cable that has the USB-A adapter into a
wall plug
adapter,
c. Plug the other end of the USB-C cable in to the USB-C Charging Port on the
38
Torx Tool.
USB power source.
camera.
Figure 7: USB-C Cable to USB-C Charging Port