Beta 1933IH Instrucciones página 10

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR
PERFORMING MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE
VALUES FOUND IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
Additional personal protective equipment to wear according to the values found in the environmental
hygiene/risk analysis survey if the values exceed the limits under current regulations.
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL
FOLLOWING A SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY
EXPOSURE OF HAND-ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE HELMET
TECHNICAL DATA
FREE SPEED
CHUCK CAPACITY
POWER
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (ø)
MEAN AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
SOUND PRESSURE LEVEL
SOUND POWER LEVEL
VIBRATION LEVEL
UNCERTAINTY
KEY TO SYMBOLS
a: wheel rotation spindle
b: wheel chuck Ø 3-6 mm
c: spindle nut
d: open end wrench
e: grinding wheel
INSTRUCTIONS
Air supply connection
For the correct use of the pneumatic wrench, always observe the maximum pressure indicated in the technical data table, as
measured at the tool inlet. Feed the pneumatic tool with clean, condensate-free air (picture 2). Excessively high pressure or
humidity in supply air results in shorter life for the mechanical parts and may damage the tool.
10
20000 giri/min
Ø 3-6 mm
0.75 kW
1/4" GAS
6.2 Bar
10 mm
370 l/min
0.800 kg
207 mm
LwA = 99.1 dB
LpA = 88.1 dB
2.6 m/s
K=0.75 m/s
f: safety lever
g: grinder start lever
h: oil lubrication
i: air inlet 1/4" GAS
m: air outlet
2
2
EN I