Publicidad
Idiomas disponibles
Idiomas disponibles
21. Conduct children protection in the
workshop. Focus on your work. Looking
around, talking, and "being incautious"
may be the careless behavior causing
severe damage.
22. Do not let any of the following objects
contact with the air purification system:
liquid, flitters, metal dusts, screws, glasses,
plastics, or rocks. When these objects
contact with any component of the
machine, sparks and/or damage will occur,
reducing using effect.
23. Use recommended accessories. Impr-
oper accessories may cause danger.
24. Carefully maintain tools. Please follow
instructions related to lubrication and
components replacement.
25. Before cleaning the machine, shut
down the machine. Use brushes or
compressed air to clear fragments, and do
not use hands.
26. Do not stand on the machine. If the
machine turns over, it may cause severe
harm.
27. Before starting the machine, check
whether loose items or unnecessary
workpieces exist in the area. Clean the
area and then work.
28. Do not put hands in the air outlet.
29. When you leave the working area/or
stop working, ensure the machine is
turned off and unplug the plug.
Get familiar wit he safety notice in this
manual.
info@altonindustries.com
ELECTRICAL EQUIPMENT
REQUIREMENTS
Safe grounding
If faults happen or occur, the grounding
can minimize the resistance for current to
lower the risks of electric shock. The tool is
equipped with electric wires composed of
with grounding wire and grounding plug.
The plug must be plugged in matching
socket, and the installation and grounding
must be conducted according to all local
regulations and rules.
Do not modify the provided plug. If it
does not match the socket, allow certified
electricians to install proper sockets.
If the equipment grounding conductor is
improperly connected, there will be risks
of electric shock when the equipment
grounding lead is connected to terminal
with electricity. The insulative external
surface of the conductor is green,
indicating the equipment grounding wire,
if the wire or plug needs to be repaired or
replaced.
Certified electricians or maintenance
personnel need to check whether the
grounding instruction is completely
understood, or check whether the tool is
correctly grounded.
04
Publicidad
