English
Owner's manual
4. ASSEMBLY
Components
1. KNIFE
2. BLADE SUPPORT BAR
3. PROTECTIVE
4. AUXILIARY HANDLE
5. AUXILIARY SWITCH
Insert / Remove the battery
• Press the button to remove the battery from the hedge trimmer.
• The charged battery must be inserted into the battery compartment in the hedge trimmer by
light pressure. The closing mechanism will make a "click" when the battery is inserted.
ATTENTION: Always remove the battery from the hedge trimmer before performing any
operation (put on the protections, adjust the handle, etc.).
Hand protection placement
22
NOTE: The hand protection can be already installed at the hedge
trimmer.
• Remove the blade guard before attaching the hand guard.
• Insert the hand guard into the hedge trimmer holder and secure it
using two screws (supplied).
6. LOCK BUTTON
7. TRIGGER SWITCH
8. BUTTON TO REMOVE THE BATTERY
9. BATTERY
10. BLADE COVER