Descargar Imprimir esta página

UFESA SMART DIGITAL Manual De Instrucciones página 17

Ocultar thumbs Ver también para SMART DIGITAL:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
for future reference. This appliance has been designed exclusively for normal household
use in home environment.
This appliance must be used only for the purposes for which it was designed, i.e. as an
iron. Any other use will be considered improper and consequently dangerous. The manu-
facturer will not be held responsible for any damage arising from misuse or improper use.
This appliance is to be connected and used in accordance with the information stated on
its characteristics plate.
This appliance must be connected to an earthed socket. If it is absolutely necessary to use
an extension cable, make sure that it is suitable for 16A and has a socket with an earth
connection.
The appliance must never be placed directly under the tap to fill the water tank. The elec-
trical plug must not be removed from the socket by pulling the cable. Never immerse the
appliance in water or any other liquid.
Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.)
This appliance reaches high temperatures and produces steam during use, this could cau-
se scalds or burns if not used properly.
Do not allow the power cable to come into contact with the soleplate when it is hot.
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
BEFORE THE FIRST USE
Before using the steam station, please ensure you read the user manual and understand
all parts and features of the steam station. Be sure to remove any packaging material and
labels before using for the first time.
In the first use they can break off odours or fumes that sent quickly. Do not spray for the
first time on clothes and there may be traces of dirt on the soleplate.
OPERATING INSTRUCTIONS
1. Filling the water tank
1. Open the filler cap (9).
2. Fill the water tank (7). Never fill the tank above the "max." level mark (10)!
3. Close the filler cap.
4. Once filled, press the steam release button (5).
Important: In case the tank runs out of water and the appliance continues to run for at
least 2 minutes, the icon
will flash and you will hear three beeps, after which the
pump will stop running. Then refill the water tank and press the steam release button (5).
The icon
will stop flashing.
Water to be used
The device is designed for use with tap water.
Important: Do not use additives!
If the water in your area is hard or semi-hard use mix tap water with distilled or demi-
neralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water:
tap water). Check with your water supplier to determine the type of water in your area.
17

Publicidad

loading