Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Controls
(4)
Controls
Operating sche-
me
Circuit
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
(1) (2) (3)
(2)
(1)
+
-
(1)
Contact surface "-"
for reducing the welding cur-
(5)
rent in 5 A increments
(2)
Contact surface "="
for matching the power source
to the remote control
(3)
Contact surface "+"
for increasing the welding cur-
rent in 5 A increments
(4)
Display
(5)
Contact pins
A closed circuit is required to operate
the TP09 remote control. The remote
control is held on the workpiece (1) by
the contact pins.
The welding current is adjusted by
bringing the rod electrode (2) into con-
tact with one of the 3 adjustment sur-
faces.
9
Publicidad
