Lenco LS-470 Manual De Usuario página 18

2.10. The platter will stop turning if there is no sound output from the
speakers in 3 minutes. Get the tonearm back to the arm rest and
repeat the process 2.6 if you want to play the record again.
Bluetooth Operation
Bluetooth Receiver
1. Connect the included power adapter to the turntable and power
on this unit, the indicator will light in red.
2. Switch the function knob to Bluetooth mode. The indicator light
turns blue and flash quickly. You will hear an activation sound from
the turntable.
3. Turn on the Bluetooth feature of your media device and search for
and select "Lenco LS-470" to pair the media device and turntable.
4. Once your media device is successfully paired with the turntable,
the turntable will play a short confirmation sound.
5. Play and stream music from your media device to the turntable.
The indicator light will become solid blue.
Note: Bluetooth version: 5.0
"This product has a Bluetooth reception function, you can not
transmit any Bluetooth sound with it: this means that you can
receive wirelessly a Bluetooth sound signal from an external
source like a smartphone."
AUX-IN Operation
This turntable includes an auxiliary audio signal input jack for
connecting external audio devices like MP3 players, CD players, and
older, non-dockable iPods, so you can listen to your external source
through the turntable's speakers.
1. Use an audio cable (not included) with one 3.5 mm stereo
connection on each end of the cable.
2. Plug one end into the AUX-IN jack on the turntable and the other
end to the Line Out jack of the audio device.
18