Würth Master RW 160 Instrucciones Para El Manejo página 9

RW 160 - GB Seite 9 Mittwoch, 14. April 2004 2:04 14
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the
machine and the ventilation slots clean.
The machine is fitted with self-stopping carbon
brushes. Upon adequate wear, the machine
switches off automatically. Have carbon brushes
replaced from an authorized after-sales agent for
Würth power tools.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest
Würth branch office.
Guarantee
For this Würth machine, we provide a guarantee in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the device is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth power tools.
Environmental Protection
The plastic components are labelled for categorized
recycling.
Noise/Vibration Information
Measured
EN 50 144.
Typically the A-weighted noise levels of the product
are: sound pressure level: 91 dB (A); sound power
level: 104 dB (A).
Wear ear protection!
The typical weighted acceleration is 2.5 m/s
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization
EN 55 014, EN 61 000, ICE 60 745 according to
the provisions of the regulations 73/23/EEC,
89/336/EEC, 98/37/EC.
04
Adolf Würth GmbH & Co. KG
M. Wölfle
Subject to change without notice
Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
values determined according
documents: EN 50 144,
R. Bauer
to
2
.
9