Tesmed TE-880R PLUS Manual De Uso página 67

Starting from program 2, the area that can be treated will be
shown on the display for each type of treatment: a dot will flash
on the human figure on the display to indicate the area that can
be treated with the selected program.
For example, for the 2 TENS program, a dot will flash on the
human figure near the shoulder, to indicate the treatable area.
For the list of programs and relative indications see page 75 of
the manual.
6.4 For TENS and EMS programmes the default treatment
duration is 30 minutes, however, it is possible to
adjust the treatment duration for TENS and EMS
programmes
The programmes have a default duration of 30 minutes, if you
wish to customise the treatment duration, after selecting the de-
sired programme, before giving intensity, press the [T] button
(do not hold) to re-adjust the treatment duration. The LCD di-
splay shows the following:
6.5 Select treatment channel
By default the two channels are selected, two small arrows ap-
pear on the display one to the left and one to the right, with the
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
67