DIRECTION FOR USE
/ Step 1
Adjust the sliding lid to its widest opening. Fill the
burner with the ethanol, watch carefully till you reach
under the level of the "Max" line. Do not overfill or spill.
CAUTION:
Please ensure your pebbles or logos are not covering
the opening in case of accidental spillage.
Any spilled ethanol must be immediately removed
with an absorbent tissue and cleaned with water to
prevent ignition outside the burner reservoir.
Fuel must be kept in safe distance (min. 1 m/40
inches) to the fireplace. Do not place fuel in front of
the fireplace.
/ EXTINGUISHING
CAUTION: Never extinguish the flame with water!
1/ Let the fuel burn out completely if possible. This
prevents alcohol left in the burner and deflagration
when reigniting.
2/ If you wish to extinguish the fire before the fuel
has completely burned out. Please use the control tool
to fully close the sliding cover of the burner in a fast
motion, completely extinguish the flame.
3/ In case the flame is not extinguished immediately. Repeat
the above instructions until the flame is fully extinguished.
4/ Do not touch the fireplace while burning. Please allow
at least 15 minutes to cool down before touching the
fireplace after flame is extinguished.
/ Step 2
Use a long match or a long-end lighter to ignite.
When igniting, keep a safe distance at arm's length.
CAUTION:
Fuel will burn low at first. Please allow 10-15 minutes
to reach the optimum temperature and flame height.
Opening or closing the sliding cover on the burner
can adjust the flame.
Avoid drafts for long burning time.
Always maintain a safe distance of at least 1 meter
(40 inches) from the fireplace when the flame is lit.
5/ It is urgently recommended that you keep a Class
B fire extinguisher at hand close to the device in case
of fire.
EN
7