Publicidad
Idiomas disponibles
Idiomas disponibles
Controllers
Plug your Joystick Controllers into the controller jacks at the
back of your console. For most one-player games, you will
use the LEFT CONTROLLER jack. See your game instruction
booklet for details.
Note: Some Atari games require different controllers, Paddle
Controllers, the ACTION CONTROL BASE™ keypad for children's
cartridges, and the VIDEO TOUCH PAD™ controller may be pur-
chased separately.
Channel Switch
Your Video Computer System is factory set to operate on a
non-broadcasting VHF station in your area. Slide the CHANNEL
switch on your game console to 3 and select channel 3 on
your television. If you receive interference on this station, slide
the CHANNEL switch on your console to 2, and select channel
2. on your television,
Note: In some areas, you will need to tune your television to
channel 3 or 4, instead of channel 2 or 3. Note that channel
3 on your Video Computer System corresponds to channel 4
on your television. *
Returning to Television Programming
To return to your regular television programming, you must
reconnect your television antenna to your television. Be sure
to turn your Video Computer System off and to unplug the
power adaptor.
*In Australia, use channels 4 and 2 in place of 2 and 3, respectively, In South
Africa and Hong Kong, use channels B and C.
Publicidad
