Atari 2600 Manual De Instrucciones página 6

Installing the Switch Box
(for Video Computer System games compatible with NTSC televisions only)
lets you easily "switch" between game play and normal
television viewing. After examining the antenna connec-
tion on the back of your television, find the appropriate
instructions below and connect the switch box to your
television. You'll need a screwdriver to do the job.
Ye TVIGAME switch box is an antenna "bypass" which
4. Disconnect the antenna from your television. If you have a
twin-lead antenna wire, connect the antenna to the two
screws on the switch box. If you have a round antenna cable,
you will need an adaptor. Please check with your Atari
dealer.
une
ao
TV antenna adaptor
2. Connect the twin-lead wire from the switch box to the VHF
screws on the back of your television. If your VHF antenna
input is not compatible with the twin-lead antenna wire on
your switch box, you will need an adaptor. Please
check with your Atari dealer
UME
VHF input adaptor