Before using your new USB regulated power adaptor, please read
the following recommendations
•
Do not use this power adaptor with any electric device that may
require a different voltage.
•
Do not expose your power adaptor to direct sunlight or to any
extreme temperatures.
•
Do not use or store your power adaptor anywhere it might get wet
as this could cause malfunctions
•
Always use a soft and dry cloth in order to clean this device
•
Do not attempt to open this device as this could cause malfunctions
or the voiding of the warranty
•
If the power cord is damaged, the manufacturer or a service agent
must replace it. A qualified person must do this in order to avoid
any risks or the voiding of the product warranty.
Product: USB regulated power adaptor
Part number: ELI-1050
Brand: Steren
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the date
of purchase.
1.- This warranty card with all the required information, invoice or purchase
ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of
charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim
was received.
4.- Steren sell parts, components, consumables and accessories to customer, as
well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries, failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or
purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
IMPORTANT
WARRANTY
CONDITIONS
Highly Safe
Perfect for use with digital cameras, cellular phones, Bluetooth devices,
GPS location devices, etc.
INSTRUCTIONS
1. Connect the power adaptor to an outlet.
2. Connect the mini-USB cable to the device you wish to charge (digital
camera, cellular phone, etc.)
3. When the device that is connected is fully charged, disconnect the
mini-USB cable from the device and disconnect the power adaptor from
the electrical output.
Please check the specifications of the device. We are not
responsible for a different use specified in this instruction manual.
The battery charging feature will only works if your device has the
function. Otherwise it will only power it.
SPECIFICATIONS
Input:
100-240V~ 50-60 Hz 120mA
Output:
5V --- 1A
Plug:
mini-USB
Product design and specifications subject to change without
previous notice.
Serial number
Date of delivery
In case your product fails or have any doubt, please contact your
nearest retailer. If you are in Mexico, please give a call to our Call Center.
Call Center
01 800 500 9000
FEATURES